Just did mine and replaced it with my wifi Epson printer.
Step 1 is to open the side closet doors and with an open faced wrench, unscrew two nuts on each side. Use the access panels in each closet to get to them.
Step 2 is to unscrew the front finish frame. You’ll need your power tool to unscrew them.
Step 3 just pull, twist and guide out the frame. You’ll have a functional space, but realistically , only a 24″ will mount there and to mount that, get a scrap 1x4x21 pine board and tack it from the inside to the 1×2 hardwood side pieces. Then an El cheapo triangle cleat bracket that you attach to the back of the 24″ TV in the provided holes, and the receiver piece to the 1×4. Then the TV is slotted into the receiver.
Bad news is the TV is on the outside of the trim and Real Close to the CV list doors.
If the above is not doable, then a 30 or 32 inch will fit on the dresser top. Run the antenna cable from the inside thru the closet walks.
Attachments:
You must be
logged in to view attached files.