by

CATEGORY: FRAME & SUSPENSION COMPONENTS & TIRES

TOPIC: HELP WITH WIRING BIGFOOT LEVELING SENSOR
Posted: 03 Jun 2018 15:13 #1
Posted By: Alloy

See Forum Post HERE

I’d pulled the wiring out for the Bigfoot system. The old plugs are being replaced but I’ve lost the old power plug so I don’t know which pins the red and

black power wires go to. Can someone tell me which of the pins (looking at the back of the plug) are used?
1 – 2 – 3
4 – 5 – 6
This is a picture of the Level Sensor. I’ve been working with the 5th install manual which says there are only 2 wires but no indication which pins are used. Looks like there could be an air dump which would save manually dumping the air bags. I’ll be calling Quadra to find out if the air dump is works on a 5th leveling sensor.

 

error: Content is protected !!
Close

Pkg. download step by step

  • 1. Click on the Download link provided below.
  • 2. A browser tab will open showing your download in .zip format with the download button.
  • 3. Click the download button.
  • 4. The .zip file will appear in a pop-up winow. Click the "Save" button in the lower right corner of the popup.
  • 5. You may see a brief pop-up notice that you can click on to open the file or you can go to your "Downloads Folder" in your File Explorer.
  • 6. In the File Explorer window, your download will appear at the top of the list of downloads.
  • 7. Left click to "Highlight" the file.
  • 8. In the Header of the window, you'll see "Extract All"... A pop-up will appear, you can click "Extract" button to extract and save to the default location shown in the pop-up and open it from there or you can click on the "Browse" button and choose your preferred location to save it.
  • 9. Click on the "Extract" button.
  • 10. Once Extracted, you can open and view the file.