window shade

LANDING PAGE › Forums › COMMON RV COMPONENTS & ISSUES › ON the INSIDE › INTERIOR FURNITURE & FURNISHINGS › window shade

  • Creator
    Topic
  • 07/15/2019 at 2:46 pm #30879
    CLOC-AdminCLOC-Admin
    Keymaster
        rec3rd
        I don’t see how to get the shade out of the window. There are not any screws showing and there are not end caps on the valance. I can feel what might be latches on top of the bar at the top of the shade.

        Help,
        rec3rd

        Posted: 3:48 PM – Aug 26, 2015
        falconhunter
        Pull the day and the night shade all the way down.

        Put your hands on top of the frame like your going to do a pull up.

        Push up on the frame closest to you with your thumbs while rolling the side against the window downward with you finger tips. It takes quite a bit or pushing and rolling to get it off but it will come off.

        Hope this makes sense.

        You can also take a short screwdriver under the clip at the top and gently pry downward on the window edge while rolling it down. I have taken plenty of these blinds out and once you do one it will be easier each time.

        Chip

        B.W.Gentry
        Owner/Admin
        2007 Carri-Lite XTRM5
        Breckenridge, TX

      • Creator
        Topic
      • You must be logged in to reply to this topic.
      error: Content is protected !!
      Close

      Pkg. download step by step

      • 1. Click on the Download link provided below.
      • 2. A browser tab will open showing your download in .zip format with the download button.
      • 3. Click the download button.
      • 4. The .zip file will appear in a pop-up winow. Click the "Save" button in the lower right corner of the popup.
      • 5. You may see a brief pop-up notice that you can click on to open the file or you can go to your "Downloads Folder" in your File Explorer.
      • 6. In the File Explorer window, your download will appear at the top of the list of downloads.
      • 7. Left click to "Highlight" the file.
      • 8. In the Header of the window, you'll see "Extract All"... A pop-up will appear, you can click "Extract" button to extract and save to the default location shown in the pop-up and open it from there or you can click on the "Browse" button and choose your preferred location to save it.
      • 9. Click on the "Extract" button.
      • 10. Once Extracted, you can open and view the file.