Project: #4 – Suspension Mods (From TapaTalk Forum)

LANDING PAGE › Forums › GENERAL DISCUSSION & FEEDBACK › CUSTOMIZED & MODIFIED › TIMCAR’s “UPCOMING PROJECT’s” PROJECT › Project: #4 – Suspension Mods (From TapaTalk Forum)

  • Creator
    Topic
  • 06/23/2019 at 1:57 pm #29292
    CLOC-AdminCLOC-Admin
    Keymaster
        TimCar
        Something’s Missing… Somethings_Missing.jpg 

        Front Brace
        Front_Brace.jpg 
        Center Brace
        Center_Brace.jpg 
        Rear Brace
        Rear_Brace.jpg 

        New Rubber and Shackles
        New_Rubber_Springs.jpg 

        Waiting for the correct disc brake brackets – they shipped the 7K axle version and I need the 8K
        Stage_1.jpg 

        Brackets came in – Right side is ready…
        Right_Side_Discs.jpg

        B.W.Gentry
        Owner/Admin
        2007 Carri-Lite XTRM5
        Breckenridge, TX

      • Creator
        Topic
      • You must be logged in to reply to this topic.
      error: Content is protected !!
      Close

      Pkg. download step by step

      • 1. Click on the Download link provided below.
      • 2. A browser tab will open showing your download in .zip format with the download button.
      • 3. Click the download button.
      • 4. The .zip file will appear in a pop-up winow. Click the "Save" button in the lower right corner of the popup.
      • 5. You may see a brief pop-up notice that you can click on to open the file or you can go to your "Downloads Folder" in your File Explorer.
      • 6. In the File Explorer window, your download will appear at the top of the list of downloads.
      • 7. Left click to "Highlight" the file.
      • 8. In the Header of the window, you'll see "Extract All"... A pop-up will appear, you can click "Extract" button to extract and save to the default location shown in the pop-up and open it from there or you can click on the "Browse" button and choose your preferred location to save it.
      • 9. Click on the "Extract" button.
      • 10. Once Extracted, you can open and view the file.