- This topic has 0 replies, 1 voice, and was last updated 6 years, 3 months ago by
CLOC-Admin.
-
Topic
-
We would like to replace our furniture. We have no experience with this and need to know how to remove and put the new ones in place. Any help would be great.
Thanks
Don & Donna
Posted: 9:41 PM – Nov 11, 2015We replaced our recliners with Lazyboy Pinnacle Recliners. Much more comfortable and I believe lighter. I sold the original recliners on Craigslist. We have kept the sleeper sofa. We don’t use it very often but when my daughter visits she sleeps on it and finds it comfortable.All of the furniture is standalone and can be removed easily.
Mark
Posted: 9:02 AM – Nov 12, 2015We replaced our recliners with wall hugger theater seating. Besides the residential fridge, its the best thing we ever did. As far as removal of the old stuff….it comes apart. Its the only way to get the stuff out of the entrance door, especially since LS and Carriage do not use 30″ doors. The backs pull straight up and off of the chair bases. The new seating I ordered came to the house in 3 boxes. Very easy to install.
Posted: 11:19 AM – Nov 12, 2015Like Vairman, we replaced the factory recliners with leather Laz-y-Boy recliners, but the Harbor Town wallaway model. Had them almost 4 years now and very comfortable. We did not replaced the factory short sofa/hidabed.Rick
Posted: 1:15 PM – Nov 12, 2015You should be able to remove the backs off of the recliners to get them out easier and the back for the sofa sleeper should un-bolt to make it easy to get out. We replaced our furniture twice now and you will have to do some careful measuring to make sure everything will fit. We have an Ashley double reclining loveseat and it came apart so I could get it in very easily and we have two Coaster leather tufted wing back accent chairs with a small table and the chairs came with the legs removed so they were very easy to get in.
Chip
Posted: 9:00 PM – Nov 18, 2015Thank You all for the info.B.W.Gentry
Owner/Admin
2007 Carri-Lite XTRM5
Breckenridge, TX
- You must be logged in to reply to this topic.