LIPPERT Furniture

LANDING PAGE › Forums › COMMON RV COMPONENTS & ISSUES › ON the INSIDE › INTERIOR FURNITURE & FURNISHINGS › LIPPERT Furniture

  • Creator
    Topic
  • 07/15/2019 at 3:10 pm #30923
    CLOC-AdminCLOC-Admin
    Keymaster
        joatay
        Has anyone removed furniture in their Lifestyle? If so, does it come apart to be able to take out the door. We have two swivel recliners that are too big and a love seat sofa bed that is uncomfortable. We plan to go to Lambright Factory for some replacement furniture but don’t know if they will remove our furniture for us.

        Thanks in advance for help,

        joatay

        Posted: 11:57 AM – Apr 10, 2015
        falconhunter
        When we replaced the furniture in our 2011 Carri-lite the recliners had a latch on the side to remove the backs. We had to hunt for it but very easy once we found it. The sofa sleeper back had to be removed by taking out a few bolts. Very easy to get out once the backs were removed.Hope this helps.

        Chip

        Posted: 9:33 PM – Apr 10, 2015
        joatay
        Chip,
        Thanks, we will look for the latch and bolts . Appreciate your post.

        joatay

        B.W.Gentry
        Owner/Admin
        2007 Carri-Lite XTRM5
        Breckenridge, TX

      • Creator
        Topic
      • You must be logged in to reply to this topic.
      error: Content is protected !!
      Close

      Pkg. download step by step

      • 1. Click on the Download link provided below.
      • 2. A browser tab will open showing your download in .zip format with the download button.
      • 3. Click the download button.
      • 4. The .zip file will appear in a pop-up winow. Click the "Save" button in the lower right corner of the popup.
      • 5. You may see a brief pop-up notice that you can click on to open the file or you can go to your "Downloads Folder" in your File Explorer.
      • 6. In the File Explorer window, your download will appear at the top of the list of downloads.
      • 7. Left click to "Highlight" the file.
      • 8. In the Header of the window, you'll see "Extract All"... A pop-up will appear, you can click "Extract" button to extract and save to the default location shown in the pop-up and open it from there or you can click on the "Browse" button and choose your preferred location to save it.
      • 9. Click on the "Extract" button.
      • 10. Once Extracted, you can open and view the file.